Product Application
This product can turn on and off the power of various electrical devices according to user settings. Control objects can be street lights, neon lights, advertising signage lights, production equipment, motors, pump equipment and all other electrical equipment and household appliances. In addition, this product supports customized services, please contact customer service if necessary!
Product Parameters
| Product Branding | PUFFINS |
| Product Model | HK-FK040 |
| Operating Voltage | 12V, 24V, 220V, 380V |
| Ambient Temperature | -40℃ ~ 70℃ |
| Relative Humidity | <95% |
| Emission Frequency | 433MHz (420~450MHz) |
| Output Mode | Passive always open/Normally closed output |
| Host Size | 88 × 72 × 59 mm |
| Remote Control Channel | 1, 2, 3, 4 |
| Mounting Mode | Rail mounting, screw mounting |
Product Function
Working mode
Self-locking version
Press the transmitter (1) button (external trigger), the receiver (1) way to start working and then press the transmitter (1) number button (external trigger), the receiver (1) way to stop working (2),(3),(4) road similar
Note: Only one channel can be emitted at a time
Jog version
Hold down the transmitter (1) number button (external trigger), the receiver (1) way starts working, loosen the transmitter (1) number button (external trigger), and the receiver (1) way stops working (2),(3),(4) road similar
Version introduction
- One transmitter controls the receiver
- One shot and more receiving: One transmitter controls multiple receivers
- Mutual sending and receiving each other Transmitter control receiver; The receiver can also control the transmitterFour shots and one receive: Four transmitters control one receiver
Note: The frequency, mode, and master slave must be adjusted in the event of a power failure
Remote Controller Learning and Code Clearance
Learning method: After powering on, press the learning button for 3 seconds; the learning light is on (the same as transmitting and receiving), at this time press any learning key transmitter(Receiver) three times in a row; the learning light flashes three times in a row, and then the receiver (transmitter) flashes three times three times in a row the learning is completed. Power off and then power on can be used.
How to clear the code: After powering on, press the study button long and hold until the learning light goes out. Clearance complete!
Note: The match has been completed before leaving the factory, and it can be used without pairing to learn!
Matters Needing Attention
- For devices that are likely to cause a life-related accident or have a significant impact on the trial due to a timing switch error (e.g. medical equipment and large equipment etc.) please do not use this timing switch.
- For those equipment that have suffered significant property damage due to the error of the timing switch (such as large heat or cold storage, etc.), when using this timing switch be sure to use this timer switch with sufficient margins for the values of characteristics and performance, and take safety measures such as double circuits.
- Do not repair, disassemble or modify by yourself. For repairs, inspections, etc., please entrust the dealer or the user responsible for the construction.
- The switch operates in environments free of moisture, corrosion, and high metal content gases. Keep away from high-voltage lines, large transformers, and other places that interfere with remote control signals.
- Do not touch the terminal section after the power is turned on.
- Do not allow this switch to get contaminated with oil or water.
Wiring Diagram
